Analysis: All personnel are observed wearing hard hats throughout the entire video.
Instruction: Scan all visible personnel. Confirm an OSHA-approved hard hat is actively worn on the head. Log the exact MM:SS timestamp if any worker is seen without one.

Analysis: There is no direct visual evidence that either of the personnel is wearing safety glasses or a face shield. Due to the low light conditions and camera angle, their faces are not clear enough to confirm the use of eye protection.
Instruction: Scan all visible personnel. Confirm the presence of safety glasses or face shields. Log the exact MM:SS timestamp and describe the task if any worker is seen without proper eye/face protection.

Analysis: The worker at height is wearing a safety harness, but it is not visibly attached to any anchor point on the pole or ladder. Therefore, it is not being correctly used for fall protection.
Instruction: Identify any workers operating above ground level. Verify safety harnesses are worn and appropriately secured. Log the MM:SS timestamp if a worker is at height without a harness or if it is visibly unattached.

Analysis: The worker climbing the ladder and performing the task at height is wearing work gloves.
Instruction: Scan the hands of all visible personnel. Confirm they are wearing proper work gloves while handling tools, equipment, or materials. Log the exact MM:SS timestamp and describe the task if any worker is seen working bare-handed. (Note: Pay special attention to insulated gloves if electrical work is actively being performed)

Analysis: Both personnel are observed wearing high-visibility safety vests with reflective stripes.
Instruction: Check the outer clothing of all workers in the frame. Confirm the presence of a high-visibility safety vest. Log the exact MM:SS timestamp if a worker is moving or working within the designated area without a visible hi-vis vest.